Forefront Endpoint Protection 2010 (FEP2010) could be used standalone for ~ $10/device or user/year on any client or server OS via volume licensing. Using the SCEP2012 or FEP2010 client installer to manually install the product and not use the SCCM centralized reporting and provisioning is. Jan 29, 2013 Support Tip: ConfigMgr clients fail to register and generate 0x80040231 errors in CCMExec.log ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★.

THIS METHOD HAS BEEN DEPRECIATED AS OF FOREFRONT ENDPOINT PROTECTION UPDATE ROLLUP 1. PLEASE SEE FOR THE NEW METHOD.

As you are probably aware by now, Forefront Endpoint Protection 2010 (FEP 2010) integrates with SCCM to provide you with one console to manage your entire environment, leveraging your SCCM infrastructure to help deploy anti-malware protection. One of the problems we have with SCCM is the ability to leverage the Software Updates capabilities automatically. For each software update you wish to deploy, you have to add it to a deployment package as well as a deployment. This is fine for monthly security patches, however this process isn’t very good when dealing with anti-virus updates since most vendors release updates multiple times a day.

FEP doesn’t help matters much with this issue, and a lot of customers have had issues with not being able to leverage their SCCM distribution points. FEP gives you three methods to deploy definitions: • WSUS • Microsoft Update • UNC File Share I won’t go deep into the pros and cons of each, but suffice it to say that none of these will leverage your distribution points (unless you create UNC shares and point your clients to your DPs, which is possible with different policies, but somewhat of a pain). Leveraging your DPs So how can we leverage our DPs if the above three options don’t allow us to do so? The way we accomplish this is rather simple: • Have a script to download the definition files • Create software distribution packages that point to the location where our definitions have been downloaded and update those on an 8 hour schedule (since FEP updates are released 3 times a day) • Create collections of machines with out of date definitions (both 64bit and 32 bit) – I’ll explain this a bit more in a second • Create a recurring advertisement to install the definitions But before we do all that, we have to understand how the definition process in FEP works. Forefront Endpoint Protection Definition Files FEP has 4 definition files • Full definition file (Base ~60MB as of this writing) • Binary Delta Definition (1-15MB) • Delta Definition (1-15MB) • Network Inspection Service Definition File (only used on clients where NIS has been enabled) For each of these files, there is an x86 and x64 file, so 8 total files available. Your full definition file is generally between 40-70MB in size and will normally be installed after a new FEP Client install. The binary delta definition file is generally 1-15MB in size and is used if your client is more than a month behind in its definition updates.

The delta definition file is generally 1-15MB in size (usually smaller than the binary delta definition file) and it installed typically on a daily basis (released 3 times a day). More information about the definition files can be found at: One thing to keep in mind about the definition files is that these files can be downloaded manually EXCEPT for the Binary Delta Definition files. I’m still trying to track down a link to download these files, and when I do, I’ll make sure to post an update here.

Putting This All Together So now that we know the files we’re dealing with, let’s put this together. First thing we need to do is setup a process to download the definition files automatically. • Navigate to Desired Configuration Management – Configuration Baselines • Right click on Custom FEP Monitoring – Definition Status • Click Assign to Collection • In the Assign Configuration Baseline Wizard dialog box, click Next • Click Browse • In the Browse Collection dialog, navigate to FEP Collections Deployment Status Deployment Succeeded • Click OK • Click Next • For the baseline evaluation schedule, you can stick with the default of 7 days, or change this to be more frequent if you desire • Click Next • Click Next • Click Close. Now once the baseline evaluates, the collections you create in the steps below should begin to populate with machines. Creating the Collections So now that we have the DCM Configuration Items created, we can now create our collections leveraging the compliance of the CI and the CI Unique_ID. There are a few ways to do this, however I’ll show you the way I did it.

Hello, I found your guide extremely helpful, i have just setup sccm in my company for FEP only (we have another WSUS server) and this is exactly how i want the definition updates to work I followed the guide to the end, have created all 6 Collections, however i cannot get them to populate with clients! I have 2 clients that should show up in the “Definitions Greater than a Month Old x86” collection, however nothing shows up Both clients show up just fine in the collection “FEP Collections Definition Status Older than 1 week” – this is one of the collections that FEP installation creates It is as if your query doesnot run, however the “original” FEP CI searches for the same attribute (AntivirusSignatureAge) and that CI/collection works fine, however it’s locked and i cannot edit it to add x86/x64 detection. Besides the creation of the CIs, do we also need to create a new CI Baseline that contains them and apply it to the collections? Any help would be appreciated.

Thanks, Antonis. Richard, Thank you for your excellent process.

It ‘was’ working very well, until MS decided to no longer make available via download the FEP delta update executable. We have been having issues here for about 2 weeks with the delta running, and after working with premier support, faced with using one of the “supported” update methods, MS Update, UNC or WSUS. We can utilize the SCCM via WSUS with FEP roll up 1, which is what we are looking at now. Anyway, just wanted you to be aware of the change regarding delta updates. First of all, thanks for this excellent post and for all the work and time you’ve dedicated to it. Raaz 3 Full Movie Free Download For Mobile Mp4 there.

One question, do you have any step-by-step installation guide to install SCCM 2007 R3 from scratch? We’ve just acquired this product but I would like to have a guide to install it correctly. Is it necessary, recommended or mandatory to have a separate server working as a distribution point? Can one server handle all functions? I know it all depends on how large your network infrastructure is. In my case I have 200 workstations, some of them are running Windows 7 x64, some others Windows 7 x86 and we still have a few running Windows XP. We only have one site for Active Directory, 2 Domain Controllers, a different server running WSUS 3.0 SP1, we also have a server running SQL Server 2008 R2 and we also acquired Forefront Endpoint Protection 2010, which I need to deploy after Configuration Manager is up and running.

Any advise will be greatly appreciated. Thanks in advance for your help. @Byron No, I do not have a step by step installation guide for SCCM 2007 R3. The reason for that is because it really depends on what you plan on using the product for.

Some people may want to utilize different site roles, you also need to determine your version of Windows/SQL etc. There is also the issue of extending the AD Schema, using native mode, etc that can complicate matters. So there’s no real one size fits all install guide. That being said, you can install all roles on one server if the hardware can handle the load. But again, this recommendation is hard because we need to know how many clients you plan to manage, where the clients are (we don’t recommend clients going across the WAN to get content, though if the WAN speeds are good, then it’s an option).

In your specific configuration, you’d probably be ok with one primary server with all the roles on the same box since it’s only 200 clients, but I’d strongly suggest testing that out. @Tolvis Are the roaming users in a VPN scenario, connected on the corporate network, or some other way back to the corp network? If they never check in, it’s hard for them to get access to corp resources without something like direct access setup. If they are on the corp network, SCCM’s roaming capability should have the client go to its nearest DP provided that you have your boundaries setup correctly.

(SCCM) is a great tool from Microsoft that helps IT organizations gain better control over the variety of assets under their purview. SCCM offers a very good experience out of the box, but when it's combined with add-ins and complementary utilities, it really shines. Here's a look at five of the add-ins that I have either used or am using right now for SCCM management. 1: System Center Configuration Manager 2007 Toolkit V2 Even Microsoft knows that SCCM has some room for improvement; as such, Microsoft has made available the second version of its conglomeration of 11 useful utilities. Dubbed, the download package contains the following utilities: • Client Spy. Helps SCCM administrators troubleshoot problems related to software distribution, inventory, and other SCCM-based tasks. • Delete Group Class Tool.

Removes inventory group definitions. • Desired Configuration Management Migration Tool. Migrates 2003 DCM items to SCCM 2007. • Desired Configuration Management Model Verification Tool. Validates DCM configuration items and baselines. • Desired Configuration Management Substitution Variable Tool. Authors desired configuration management configuration items that use chained setting and object discovery.

• Management Point Troubleshooter Tool. Ensures that SCCM management points are in good operational order. • Policy Spy. Provides SCCM administrators with a way to troubleshoot policies being applied to clients. • Preload Package Tool.

Used to manually install compressed copies of package source files on Configuration Manager 2007 sites. • Security Configuration Wizard Template for Configuration Manager 2007. Helps administrators reduce the attack surface of Windows Server 2008 R2-based servers. • Send Schedule Tool. Triggers a client-side evaluation of a DCM baseline. A log file viewer that no SCCM administrator should try to live without. In particular, I make regular use of Trace32/SMS Trace, which is installed as the default log file viewer on my SCCM system.

In Figure A, you'll see why Trace32 is so useful. Notice that there is a huge amount of information in each SCCM log file. Trace32 brings order to the chaos and provides additional detail in the window at the bottom of the screen. In Figure B, notice that the Management Point Troubleshooter Tool does a pretty complete job when it comes to making sure that management points are ready for action.

Figure A SMS Trace is the one tool SCCM admins can't be without. (Click the image to enlarge.) Figure B The Management Point Troubleshooter Tool helps you to avoid problems.

(Click the image to enlarge.) 2: SCCM Autodoc SCCM infrastructures have a ton of information about existing technology environments, and SCCM itself (once it has been deployed for a while) has a lot of its own information, including client agent details, package information, advertisement configuration, collection information, and more. The tool provides you with a way to fully and completely document the pertinent details of your SCCM infrastructure. I have used SCCM Autodoc in other environments but have not deployed it yet at, so the screenshots below are taken from the sample documentation. The screenshot in Figure C is intended to give you an overview of the sheer breadth of information that is captured with SCCM Autodoc. The screenshot in Figure D gives you a look at some of the details that are captured.

SCCM Autodoc captures a ton of information. (Click the image to enlarge.) Figure D Here is a look at the kind of detail you can expect from SCCM Autodoc. (Click the image to enlarge.) 3: PackageStatusDetailSummarizer For those of you who are running larger SCCM organizations and need to be made aware when packages are staged and what versions of a package are available on various distribution points, a is just what the CIO ordered. This desktop gadget works on Windows Vista and Windows 7 desktops that support Windows Sidebar and, once you provide the gadget with the package ID that you'd like to watch ( Figure E), you get a look at the distribution status of the current package ( Figure F).

Since my SCCM environment is pretty small, I've also included a screenshot from the tool's documentation ( Figure G). Figure E Point the desktop gadget to your SCCM server. This single point look shows the status of the requested package. Figure G Here's a look at a more complete version of the tool. 4: SCCM Copy and Paste context menu add-on There may be times when you need to create a bunch of similar collections. Using the default method, this can be a tedious process as you manually create queries for each new collection, even if you just need to change one aspect of the query.

Wouldn't it be nice if you could just copy and paste the collection details? With, now you can. With this, you can copy and paste collections, packages, advertisements, and programs without having to recreate each and every one from scratch ( Figure H). Figure H SCCM Copy and Paste add in 5: ForeFront Endpoint Protection 2010 At Westminster College, we've standardized our antimalware efforts around (FEP) and we couldn't be happier.

In the latest version of FEP, Microsoft adopted the excellent and lightweight Microsoft Security Essentials and added enterprise management features that are critical in today's regulated workplace. When, magic happens. With the combination, you can take a hands-off maintenance approach with the FEP client, get constant at-a-glance statistics, centralized logging, and centralized management, and you get to leverage your existing management infrastructure to make it all happen. Deb File Installer App For Iphone more.

When you add, you can quickly and easily answer a number of important questions, such as: • What percentages of computers are currently protected? • Are the latest definitions installed? • What malware was detected in the organization? • What computers currently have malware activity? You can get a report on this, too, as you can see in Figure I. These are critical questions (answered in Figure J) and help IT take more proactive steps in preventing potential outbreaks while maintaining single-pane management. Figure I The computer details report.

(Click the image to enlarge.) Figure J The SCCM-based FEP dashboard. (Click the image to enlarge.) What is your favorite SCCM add-in? These are just some of the add-ins that are available for SCCM. If you have a favorite SCCM add-in that I haven't listed, please share it with the TechRepublic community. Related Topics.